1 / 5
Removable Dust Shoe v1.3 - with retainer C-clip for Vacmaster Shop Vac hose - easy to attach and detach the hose! — zdjęcie 1
1 / 5

Removable Dust Shoe v1.3 - with retainer C-clip for Vacmaster Shop Vac hose - easy to attach and detach the hose!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Removable Dust Shoe v1.3 - with retainer C-clip for Vacmaster Shop Vac hose - easy to attach and detach the hose!

Ocena
0 / 5
Polubienia
20
Pobrania
69
Wydruki
0
Wyświetlenia
771
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

This mod is mentioned and shown in use in this video:

This mod makes use of a “C-clip” to make it easy to attach and lock-in the 2.5" dust collection hose from my Vacmaster shop vac, and then instantly detach the hose for clean up after a cut job. I've been using this mod for months now across quite a few cuts, and it's working awesome for me.

This mod is compatible with the previous version, in that the existing slide-on shoe works and the mounts of course work. Only the main “foot” part that the shoe slides onto needs reprinted. 

It attaches using the same screws that were already in use.

Notes:

  • For convenience for anyone making their LowRider for the first time, I'm including the router mount rings (print x 2 of “makita-tool-mount_2.5-inch-HOSE_v1.1”) and slip-on shoe (print x 1 of “makita-vac-lower_2.5-inch-HOSE_v1.1”), but if you already have these for an existing LowRider, just ignore those two files. No need to reprint.
  • Also, I'm including the SketchUp file, in case it helps anyone who needs to tweak it.

Printing of the C-clip:

I printed this with enough perimeter walls to make the part 100% solid with no infill. Since I was using a 0.6 nozzle this meant 7 walls was enough for that. If you are using a 0.4 nozzle, consider printing with 12 walls.  

Printing of the main body part can be just as with the original (quoting Ryan):

“Print at 30%+ infill…. Vacuum hose gets a cable tie on the upper tool mount and one to the top of the core.” However, I printed mine with 7 perimeter walls for added strength. 

 

Q: What inside diameter (ID) is the opening (hose port)? What outside diameter (OD) of hose end will fit?
A: The opening (hose port) is 62.5mm (ID). Note this is 0.5 larger than previous, which is because previously only “tightness” provided grip, whereas now the C-clip nibs provide grip. My Vacmaster shop vac hose (nominally 2.5") is approximately 61.75mm and fits perfectly. Easy in /easy out. The actual imperial-to-metric conversion of 2.5" to millimeters is 63.5mm. Actual dimensions of hoses vary by brand. Measure yours first to know for sure. You may need to remix this to make it fit your hose, or design an adapter for it.

 

My PayPal tip jar: https://paypal.me/design8studio  

 

Various LowRider 3 CNC remixes:

 

View all my models and remixes on Printables:

 

*Amazon product links are affiliate links.   

Tagi