Simple Razor Holder (Customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of my own design: https://www.prusaprinters.org/prints/51862-simple-razor-holder Edit 2021/01/24: I uploaded the…
- Ocena
- 4,889 / 5
- Polubienia
- 37
- Pobrania
- 305
- Wydruki
- 10
- Wyświetlenia
- 1065
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of my own design:
https://www.prusaprinters.org/prints/51862-simple-razor-holder
Edit 2021/01/24:
I uploaded the .f3d file so the gap between the backplates is adjustable to your shower shelf. Simply change the parameter backplate_gap to the desired value. I changed the edges to chamfer instead of fillets, cause it looks better imho. Feel free to customize it to your needs.
Default measurements:
Overall height: 40.00mm
Overall width: 52.00mm
Gap between backplate: 3.25mm
Space between the two hooks: 32.00mm
Inner depth of the hooks: 9.00mm
Print instructions
No supports needed
You can pretty much use the default profile for (Prusament) PETG