Prusa LACK Enclosure Cable Passthrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are larger versions of the cable passthrough tube used for mounting the power supply and/or LCD controller…
- Ocena
- 4,957 / 5
- Polubienia
- 143
- Pobrania
- 1236
- Wydruki
- 19
- Wyświetlenia
- 6233
- Oceny
- 23
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
These are larger versions of the cable passthrough tube used for mounting the power supply and/or LCD controller outside of the Prusa LACK Enclosure V2.
_lack_cablepassthrough provides enough room for the power cables as well as a USB cable for external control connections. It is sized to fit the cutout from a 3/4" hole saw.
_lack_lcd_cablepassthrough is large enough to allow the LCD ribbon cable connectors to pass through. It fits the cutout from a 7/8" hole saw.
Print instructions
Gcode files are sliced for Prusament PETG on an MK3/S using the 0.20mm SPEED MK3 setting.
3mf files have been provided for those who want to do the slicing themselves. The Fusion 360 source file is also available in the files section, and is heavily parameterized for easy tweaking/adjusting.