Motosleep Bed Controller Holster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holster for bed remote control.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
This is a remote-control holster for the Motosleep bed height controller. I printed in PETG, but this should print fine with PLA as well. Should be printed upright. For some reason it's exporting the model lying on its back.
I printed two of these, one for each side of bed. One side I printed at 0.2mm layer height, the other at 0.12mm layer height.
My printer struggled a little with the bottom layers adhering for some reason until I added a decent size brim. Might have been something to do with the fillet I added to the bottom of the model.
The remote fits snuggly, but still loose enough to slide in and out with ease.