Nucking Futs TPU Fuselage01 / Nose Thickened
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thickened Fuselage01 modified using Blender to make it strong enough to be printed from TPU
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Thickened Fuselage01 modified using Blender to make it strong enough to be printed from TPU. Also increased motor mount thickness and made cut out for xt30 and motor wire to passthrough the front.
Recommended version: Fuselage01_TPU_Thick_4.5walls
Made multiple wall thicknesses from floppy to very rugged (too rugged). I tried 6walls version it was too rugged so tried 4.5walls and it was good but it would buckle on crash. For that 4walls or even 3.5walls would be preferable but I don't know if it would be stiff enough
Mesh is not perfect have small problem but doesn't really matter when printed
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
0%
Filament:
TPU
Notes:
10 walls (no gaps in side walls)
Wide brim
Category: R/C Vehicles