Innomaker Camera Mount compatibel with Articulating Raspberry Pi Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi Camera Mounting
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 981
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I am using a Innomaker camera module, i was looking for a mounting, that is compatibel with the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 from @sneaks.
This model is therefore aimed at those who use a innomaker cam, instead of the Raspberry Pi Camera Module.
It is composed of three parts:
1. Innomaker_Mounting_Baseplate.stl (Remix of @sneaks)
2. Innomaker_Mounting_Cover.stl
3. Innomaker_Mounting_Inlay.stl
The step files are also included
The Innomaker_Mounting_Inlay.stl is to stabilize the pcb of the camera, so it is strait positioned.
I recommend to use thread inserts in the Innomaker_Mounting_Baseplate.stl . The holes are modelled after this guideline:
https://www.cnckitchen.com/blog/tipps-amp-tricks-fr-gewindeeinstze-im-3d-druck
Print instructions:
Infill: 15 % or higher (gyroid)
Layer: 0,2 mm