1 / 2
MicroSwiss NG Ender5 to 3DFused X-Carriage Adapter Plate — zdjęcie 1
1 / 2

MicroSwiss NG Ender5 to 3DFused X-Carriage Adapter Plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small adapter plate for mounting the MicroSwiss NG extruder to the 3DFused CoreXY Ender 5 motion carriage

Ocena
0 / 5
Polubienia
2
Pobrania
27
Wydruki
0
Wyświetlenia
252
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a small adapter plate for mounting the Microswiss NG direct drive extruder (I have the Revo pattern but they should all be the same) to the 3DFused CoreXY Ender 5 motion carriage platform. 

The countersunk holes are designed for M3x8 socket capped screws to fit the printed plate to the X carriage assembly. The other holes are for M3 heat set inserts to mount the NG extruder itself, the stock fan assembly that ships with the NG extuder, and the mount for the BLTouch if you have an Ender 5 Plus.