1 / 7
Spacer for Umbilical PCB on Voron 0.2 / LGX Lite — zdjęcie 1
1 / 7

Spacer for Umbilical PCB on Voron 0.2 / LGX Lite

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small improvement to get a better fixation on X-carriage.

Ocena
0 / 5
Polubienia
10
Pobrania
98
Wydruki
0
Wyświetlenia
808
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I remixed original design from 6d6178, which allow PCB mounting despite diagonal LGX Lite back screws. 
I just added 2 holes on the bottom to fix 2 more screws on the back of X-carriage, like in original Voron Umbilical design.
I use 20mm metal spacers between LDO extruder motor and this plate.

There are 2 versions :
- one for the original LGXlite extruder from Bondtech
- one for the 3D printed LGXlite, using HGX Lite kit (awesome design BTW) from SIVIS (LGX lite Extruder FDM case par SIVIS | Téléchargez gratuitement un modèle STL | Printables.com) which is a little deeper

Tagi