1 / 4
Spool Winder for KMZ-FT2 metal 35mm film case — zdjęcie 1
1 / 4

Spool Winder for KMZ-FT2 metal 35mm film case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Spool Winder for KMZ-FT2 metal 35mm film case. It helps with winding your 35mm film into the cartridge/case

Ocena
0 / 5
Polubienia
3
Pobrania
32
Wydruki
1
Wyświetlenia
326
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update 24-10-24 See black PLA printed version.

I extended the cylinder that extends into the case so that the knob doesn't slip out as easily. Secondly I made the bottom side concave so there is better grip with a finger when spooling the film.

 

The KMZ-FT2 panorama camera has metal cartridges that need be loaded every time by hand. If you are lucky to have two you can go back and forth between them. I have been loading mine usually from a bulk reel in a changing bag and winding the film on using a flat head screw bit. I was looking for something a little bit larger and decided to make this in Tinkercad- (still just just starting) after needing to print something very similar for my bulk computrol The grooves fit nicely in the top bit of the canister and allow my big fingers to keep everything together in the changing bag with out having to keep ‘finding the gaps or grooves’ in the top of the canister.  It is not a crank so one hand can keep pressure on the dial as a break when winding on.

 

I think this might help those with the KMZ-FT2 cases and doing their own winding. 

Mine was printed with PLA @ 30 % infill. So far so good (knock on wood). 

Tagi