1 / 4
Laptop mount: behind the monitor (VESA 100/75) — zdjęcie 1
1 / 4

Laptop mount: behind the monitor (VESA 100/75)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Smaller, faster to print version of underrated laptop mount that helps to keep the desk really tidy!

Ocena
5 / 5
Polubienia
68
Pobrania
448
Wydruki
3
Wyświetlenia
5388
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I was looking for ideas to cleanup the desk a bit and found a great model for attaching laptop behind a monitor using VESA shelf. Unfortunately I'm very impatient and once I've seen the 18 hours print time of original model and amount of used filament I decided to make it more efficient.

Hopefully it'll be useful to someone ;)

Properties:

  • 30 mm thick laptops support (33.5mm gap)
  • VESA 100x100 / 75x75

Print guidelines

These might not be the best you can do - feel free to experiment a bit.

It printed in ~5 hours on my Ender 3 V2 Neo.
(4h 40m Prusa Slicer estimation, compared to 18 hours for original version)

  • Nozzle: 0.4mm
  • Layer height: 0.2mm
  • Perimeters: 3x0.48mm
  • Top/bottom layers: 4
  • Infill: Cubic, 20% with 2mm anchoring
  • Material: PETG
  • Cooling: low to improve strength

Changes:

  • Reduced width (138mm → 33mm)
  • Stronger inside-outside connection
  • More cable holders

Tagi