Piantor Gasket Mount Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a gasket mount case design for Piantor. Both five columns and six columns are supported.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 253
- Wydruki
- 4
- Wyświetlenia
- 3162
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a gasket mount case design for Piantor. Both five columns and six columns are supported. The top and bottom pieces are fastened with 6mm x 3mm neodymium magnets. There is optional tenting via M3 heatset inserts.
The ‘noheader’ versions of the lid is designed such that the MCU needs to be mounted pretty low, either with low profile sockets or flush mounted to the PCB.
The ‘notenting’ versions of the base has a tenting wedge that should friction fit to the bottom of the ‘notenting’ base to give it a 8 degree tenting angle.
Magnets: https://www.amazon.com/DIYMAG-6x3mm-Refrigerator-Premium-Brushed/dp/B07KZQGWNN
M3 Inserts: https://www.amazon.com/gp/product/B09ZNXRD2H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Tenting legs: https://www.printables.com/model/276982-switch-blockers-tenting-legs-and-knobs