Midcentury Style Plant Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds your planter off the floor or furniture. Four printbed sizes provided. Easy two-piece joint requires no glue.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Make sure your bottom and top walls are at least 2mm thick. Print flat (as provided) for strength.
The given dimensions are the maximum size print bed that the stl can fit on. Unfortunately the design doesn't work well with scaling outside the sizes provided. You can scale it but you'll need to create/print some spacers (add a primitive to PrusaSlicer of a cube, and resize it to fit the gaps you find in your scaled print)
After printing, slide top half into bottom half in the middle, and put a plant on it.
** Update 7/28/23 - The 200mm version was over-built for even a very heavy plant. I've refined the shape and reduced the materials substantially, and added a 250mm version also.