1 / 3
ACME / QCC Type 1 propane female cap and male plug — zdjęcie 1
1 / 3

ACME / QCC Type 1 propane female cap and male plug

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tightly designed cap and plug for QCC-1 propane fittings

Ocena
5 / 5
Polubienia
53
Pobrania
596
Wydruki
7
Wyświetlenia
1933
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The threads are designed to have a 10 degree taper on the "bottom" side to match the ACME thread surface it engages, and flat on the "top" to minimize unnecessary binding.  The plug has an center tapered seat that engages the propane hose center brass fitting to create a snug sealing surface.  The plug will seat at about 1.5 full turns, providing plenty of thread engagement, and its "shaft" is long enough to clear the longest female hose-end cap that I have.  The cap will bottom out and provide a snug seal on a male ACME thread, such as on a 15-lb propane bottle.

I've checked these on several propane bottles and hose fittings.  I have one fitting (a 1-lb bottle refill adapter from Amazon) that the cap doesn't quite fit correctly on - the threads start to bind before the cap bottoms out.  This refill adapter does not fit on the other two cap designs I've tried either, and I suspect that the thread pitch is out of spec.

Cap variations embossed with "FULL", "PARTIAL", and "EMPTY", blank, and with a through-hole for a tether are provided.  G-code files for a Prusa Mini and Fusion 360 models are provided.

No supports are needed.  I printed these in PETG with 4 exterior perimeters and 30% gyroid infill.  ABS/ASA may be needed if they will be getting hot or sun UV exposed for the long term.

Ideas pulled from these designs:
https://www.printables.com/model/489592-propane-hose-dust-plug - Changes: Longer plug shaft length, larger threads diameter, brass fitting now seats on its side/taper rather than the end
https://www.thingiverse.com/thing:4834909
I like this smaller plug for the 1-lb bottle stove-side:  https://www.thingiverse.com/thing:3180456
I use these brass caps with seals on the 1-lb propane bottles:  https://www.amazon.com/gp/product/B09CG76TNW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Did you build it?  Please leave a comment and rating.

If you really love it you're welcome to throw me a bone.  Thank you.  :)

Tagi