Carry handle for Ninebot ES4/ES2 (with or without external battery)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When the Segway ES2 has a battery upgrade (ES4), the balance point of the kickscooter are right at the bottom of the…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
When the Segway ES2 has a battery upgrade (ES4), the balance point of the kickscooter are right at the bottom of the battery, making it hard to carry. This handle allow you to carry your segway when it is folded down.
Update: Added a bracket for use on kickscooters with no external battery. Will fit around the battery connection cover.
Needed for assembly:
- 2x locknut M6
- 4x locknut M5
- 2x screw M6x30
- 4x screw M5x30
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15% Gyroid
Filament: Prusa PETG Black
Notes:
Make sure all parts are laying flat when printing so that the print layer direction is perpendicular to the load direction when carrying the kickscooter. Also make sure to use thick outer perimeter (4-6 lines when using 0.4mm extruder) to add strength to the parts.
Category: Sport & Outdoors