1 / 3
Waterproof Case with Gasket — zdjęcie 1
1 / 3

Waterproof Case with Gasket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed this for my brother to put his garage door opener electronics for his motorcycle, since the old case had…

Ocena
0 / 5
Polubienia
11
Pobrania
101
Wydruki
0
Wyświetlenia
977
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Designed this for my brother to put his garage door opener electronics for his motorcycle, since the old case had cracked.

Simple case in PLA with TPU gasket to allow power wires into run off external power.

Scad file can be used to customize size of box.

Print instructions

Print in PLA with a 0.40 nozzle and 0.20 layer height.

Print gasket in TPU with 0.40 nozzle and 0.20 layer height.

Cut off excess gasket material, extra was used since printing the small area of the wire opening was too small an area for TPU.

Tagi