1 / 2
21mm grommet for junction box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed with 30D TPU/flex, 0.16mm layer height and 0.4mm nozzle. You can print in smaller layer heights, but I…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 2
- Wyświetlenia
- 211
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Printed with 30D TPU/flex, 0.16mm layer height and 0.4mm nozzle.
Printed without support.
I added the FreeCAD source file. If you print it with more rigid TPU/flex, I recommend to make the middle part thinner.