Rush Cherry antenna mount for Cockroach 3" quadcopter frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fits on the back of a Cockroach 3" frame so you can mount a RushFPV Cherry antenna in it. The antenna will be…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This fits on the back of a Cockroach 3" frame so you can mount a RushFPV Cherry antenna in it. The antenna will be mounted at a 45 degree angle.
I've tested it with the MMCX variant, but I'm sure it'll also work with the UFL version. The SMA one won't fit.
I've printed it with 30D (shore hardness) filament at 0.20 resolution and 100% infill. 40D shore hardness will probably be better suited.
PLA and other hard print materials are not recommended, as they will break easily when your quadcopter crashes.
Important: Rotate the item 180 degrees so it stands like a tower.