HTC Vive Desk Mount Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I rebuilt the clamp and screw for the "Universal HTC Vive Desk Mount" because i wasn't able to print them without…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I rebuilt the clamp and screw for the "Universal HTC Vive Desk Mount" because i wasn't able to print them without fusing together, which resulted in a screw that wouldn't turn.
These parts are now all separated, so after printing them you just have to insert the screw and then screw the cap onto the end. It's quite a tight fit, but that also means it won't unscrew by itself.
Print Settings
Printer:
Original Prusa i3 MK2
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15-25
Notes:
You'll need supports for the screw hole and the connector at the back of the block, but don't use supports for any of the threads!
Category: Toy & Game Accessories