Pocket Sword (collapsible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collapsible toy sword that is small enough to fit in a pocket and can be closed with caps from common PET bottles.
- Ocena
- 4,821 / 5
- Polubienia
- 328
- Pobrania
- 3174
- Wydruki
- 24
- Wyświetlenia
- 16 897
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This is my silliest design yet, but fun to play with anyways :-)
It is a collapsible sword (or lightsaber, or magic wand), that is small enough to fit in a pocket.
After printing, inset the 5 parts of the blade into the hilt and close it with cap from a normal PET bottle. The cap prevents the blades from falling out. If you wish, you can use a second bottle cap to close the other side of the hilt. This prevents the blades from extending and makes it convenient to bring the sword with you (e.g. in a backpack).
I tested the sword with different caps from PET bottles available where I live, but don’t know if all the bottles internationally use the same cap designs. If your caps don’t fit or if you don’t have any available, I also included a STL so you can print compatible caps yourself.
Print Setting recommendations:
- Layer height: 0.25mm (don’t bother printing smaller as you won’t really notice a difference in detail)
- Perimeters: 2
- Solid top/bottom layers: 4
- Infill: 15% (only matters for the hilt of the sword)
- Support: no
- Brim: Outer brim recommended for adhesion
Post Processing:
Make sure to cut or file away the brim or elephant foot nicely. This makes it easier for the blades to collapse.
Update March-23, 2024:
Added an alternative hilt and cap design.
Update July 4th, 2024:
Changed the license to allow for commercial use.