Laptop stand v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a laptop stand designed for 12-15" laptops and raises the laptop high to give more room on the desk for a…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 134
- Wydruki
- 3
- Wyświetlenia
- 1689
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- GNU General Public License v3.0
This is a laptop stand designed for 12-15" laptops and raises the laptop high to give more room on the desk for a proper keyboard and mouse while working from home. I have mostly tried it with 13-14" Dell Latitude laptops of the 2018 and 2019 models since that is what we use at work.
It's a remix of https://www.prusaprinters.org/prints/41525-13-inch-laptop-stand-40-degrees.
I have changed the angle to 45 degrees and adjusted the measurements to fit Dell Latitude laptops and made it a little bit longer to support the weight from a 14".
All the measurements can be changed with Fusion if you wan't to. STEP files are also available if you use another CAD software.
The v2 use round holes for looks. The v3 use four elongated openings and v4 use something in between.
I printed mine in black PETG but i guess PLA and ASA should also work fine.
Print instructions
I used three perimeters for strength but i think you can get away with two if you want to, especially if you use a 0.6 mm nozzle.