1 / 10
Router Planing Jig - Katsu / Makita / Noname — zdjęcie 1
1 / 10

Router Planing Jig - Katsu / Makita / Noname

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Router Jig based on 2020/2040 V-Slots - Flexible in size / Hight

Ocena
0 / 5
Polubienia
36
Pobrania
114
Wydruki
0
Wyświetlenia
1389
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

WIP

 

Router Jig based on 2020/2040 V-Slots - Flexible in size / Hight 

My setup is at 1500X700mm and works great - the vacuum port though needs some tuning

– Added STEP files for Remixes or personalization if needed

First Edit: i added a V2 which is a bit thicker and strengthened - also has a few holes to set the hight of the router and a key so it doesn't rotate 

Edit 25.8. : V2 has been updated, it is slightly wider, but way more stable

V1 works - edits were made after the first side of the table was routed, had to put a screw in the collet to fix it in place

Extra shrouds for the wheels added - as it blasted the epoxy between the wheels when at the extremes of the range making it harder to move the gantry

Tagi