Windowsill pot plant holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic pattered box designed to fit on a windowsill and hold pot plants without them dripping on the windowsill
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 2
- Wyświetlenia
- 414
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This box was designed to be 90mm deep (the depth of the windowsill, and 100mm high (the height of the basic black plastic pots the plants come in. Built as a request from my wife to stop the pots leaking onto the windowsill, and to give the collection a more even look. Modeled in Fusion 360 with a ribbed pattern extending around the outer surface, rounded corners and a rolled bottom.
Printed with a 0.4 nozzle, and 15% adaptive cubic infill. Not recommended for vase printing - I did try printing it in vase mode but while the sides worked OK but came away from the base.