Harbor Freight 20ft Flag Pole Starlink Dishy Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Starlink Square Dishy mount for Harbor Freight's telescopic 20ft flag pole.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 259
- Wydruki
- 1
- Wyświetlenia
- 2494
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a Starlink square Dishy mount for the Harbor Freight 20ft telescopic flag pole on my RV. All the existing models I tried didn't fit snug or didn't lock-in the Starlink, so I decided to model my own. This model fits snug on both the Dishy and the flag pole.
This is the flag pole it is modeled for: https://www.harborfreight.com/20-ft-telescoping-flag-pole-kit-64344.html
The original flag pole screw holes are used to secure the mount. The flag pole can still be used with all the original fittings for flags and allows dual usage as a flag pole and dishy pole.
The washers are designed to be able to use the original screws. There are two different washers and are designed to allow you to reuse the original screws and prevent them from interfering with the starlink sliding in. The smaller washer is used on the side of the mount thatr is key'ed for the cable guide on the dishy.