Rugged Box for Insta360 One R & GoPro Hero 5 Session
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged Box (Remix) to fit two Action Cams and some loose mounting equipment
- Ocena
- 5 / 5
- Polubienia
- 85
- Pobrania
- 320
- Wydruki
- 1
- Wyświetlenia
- 3652
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed Model of the legendary “Rugged Box (Parametric)” by user Whity.
I made some custom inlay to fit the following:
- 1x GoPro Hero 5 Session (with Frame)
- 1x Insta360 One R (with Frame and Lens Cover)
- 1x USB-C Charging Cable
- some loose mounting equipment
For assembly you will need 6 M3x30 Bolts which will be flush with the hinges.
If you want to use nuts on the other end you'll need longer bolts of course.
My box was Printed on a BambuLab X1C with the 0.20mm standard Profile utilising the AMS in the following filaments:
- Prusament PETG Galaxy Black for the Bottom and the Lid
- Prusament PETG Signal White for the Logos and
- Prusament PETG Prusa Orange for the Latches
Since I have no TPU yet, it didn't print the seal but the box worked great anyway.
Happy printing :)
****** EDIT ********
05.07.2023
Added an inner lip for seal placement on the Bottom part (V1.1). I missed to extrude it in V1.