CZ75 - recoil buffer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
reduces the bounce, should be fine for all CZ75 Models
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Self-designed and simplified recreation of the originally buffer plates for the CZ75 but with twice the height (5.7mm), to reduce the bounce and increase the lifetime of the gun.
Originally these are made of a solid plastic, but with a flexible one the result is a lot better, but it doesn't last too long. So save money and build it yourself or if it is not available, it will help.
note: I don't own a CZ75 myself, but it fits for others and you can feel the difference.
hint: Reduce Z to 50% to get the original size.
print settings:
nozzle: 0.4
layer height: 0.2
material: flexible (tested TPU 95A and PP)
raft: no
support: no
post-processing and assembly:
clean the part of possible stringing and install it between the return spring and the spring rod
NOTE: I assume no liability for improper use, use at your own risk. Be sure you know exactly what you are doing. Improper use can result in damage or injury. To be sure, ask your gunsmith before installation.
It is in my country a permission free gun accessories, but if it is prohibited in your country, do not download or print it.
Note your local laws.