ZodZero Gasket Mount Case w/ Optional Tenting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a gasket mount case design for the ZodZero by splitlogic.xyz.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a gasket mount case design for the ZodZero by splitlogic.xyz. It features optional tenting via M3 heatset inserts. The top piece fastens to the bottom via 6mm x 3mm magnets. The light diffuser on the base needs to be glued in place with either hot glue or superglue. There are also little button covers for the tact buttons near the OLED. These should friction fit and rest right on top of the tact buttons for easy pressing.
Magnets: https://www.amazon.com/DIYMAG-6x3mm-Refrigerator-Premium-Brushed/dp/B07KZQGWNN
M3 Inserts: https://www.amazon.com/gp/product/B09ZNXRD2H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Tenting Legs: https://www.printables.com/model/276982-switch-blockers-tenting-legs-and-knobs