Digital Adapter - BabyApe ProV2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for an HD video system on the BabyApe ProV2
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
*USE AT YOUR OWN RISK* High risk of getting the camera chopped up by props
Putting a digital video system into the BabyApe ProV2. A great example of Just because you can doesn't mean you should. I did it anyways :)
Designed for the Runcam Wasp but would probably work with any 19x19mm camera. The camera mount is printed in TPU and slides over the front standoffs. The model is a bit too tall, so I just cut the extra material above the camera after mounting it.
The Spacer is to make room for a RuncamLink/Vista Unit where the preinstalled VTX goes
Settings:
Camera mount - TPU, 0.16mm layer height, no supports
Spacer - PLA or TPU, 0.16mm layer height, no supports