Cheerful rectangular sand mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sand mold for children that can float on the water like a boat. A sand mold that likes to swim in shallow water.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mold for sand and shallow water.
I added an edge to make it easier to grip the mold with a wet hand.
Create beautiful ornaments from sand, snow, ice, and even earth and dried clay.
You won't build much out of mud, but try at your own risk.
You can firmly glue two molds together with waterproof glue and you will get an unsinkable floating toy.
Before gluing the two molds, put a plastic ball in them or fill it a little with clean, boiled water, e.g. up to 1/3 of the height for the wow effect.
May not require supports.
The weight for 100% density ABS is ~24 grams.
WARNING:
The warning applies to children under 7 and other non-swimmers:
1. The mold to play only in shallow water under the constant supervision of a guardian.