Swing Chair Side Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A swing chair side tray for drinks and snacks.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Swing chair side trays never survive for long. People hold them to lift and move the chair and they break. That's what happened to mine. After much repairing they hit the bin.
Here is a replacement tray that can fit inside or outside the frame. I've gone inside to avoid the lift and break scenario.
The gcode file is for a 0.6 nozzle. I printed mine in Stone White petg so they shouldn't get so hot in the sunshine.
I've tried both organic and snug supports in PrusaSlicer. Both work but the snug supports one had less cleaning up required. That is with stock settings. Supports are only required for the 4 holes and the flat roof section.