Kraken Benchy Stand Colored (AMS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just adding a splash of color!
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 137
- Wydruki
- 1
- Wyświetlenia
- 801
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I took jtav1's file and colored it in Bambu Slicer so that others with an AMS can just use this instead of coloring it themselves. I also blocked a few areas from support placement that didn't actually need it
My settings:
0.4mm nozzle
0.2mm layer height
0.7 flush volume multiplier
tree support @ 30 degrees
Materials:
Black and Blue - (eSUN PLA+)
Benchy - (eSUN 95a TPU)
ORIGINAL MODEL DESCRIPTION:
Made from a normal Benchy, Clay Rade's tentacles, and inspired by BUT NOT REMIXED FROM BECAUSE ITS NOT PERMITTED https://www.printables.com/model/350583-benchy-organic-support-test . Also I used a random water splash model I found elsewhere for the base because I am not good at being creative.
Gcode included in case you can't figure out how to use organic supports. It's old though, probably using prusaslicer 2.6.0 alpha 2 or 3 or something. Don't trust it I have no idea what I'm doing.
I printed mine using organic supports, generated by one of the Prusaslicer 2.6.0 alpha versions. 0.40mm nozzle 0.15m layer height as per the attached gcode.