1 / 7
Radwagon 4 caboose fishing rod holder — zdjęcie 1
1 / 7

Radwagon 4 caboose fishing rod holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

14,66 € – 17,92 € netto (bez VAT)

Dla pliku: fishing rod holder v14_0.4n_0.3mm_PETG_MK3S_14h9m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 16,29 € netto (środek widełek).

Masa podana przez autora
266 g
Czas druku podany przez autora
14,16 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Dual fishing rod holder for a Radwagon 4.

Ocena
0 / 5
Polubienia
51
Pobrania
187
Wydruki
0
Wyświetlenia
2858
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Dual fishing rod holder for a Radwagon 4 caboose. The caboose has 2 sets of 3 holes for the side rails. This rod holder is designed to fit on any of the holes on either side. If you use the side rails on the caboose you can attach them using the existing screws. If you have a seat or would like to put it in a location without screws, then additional screws and nuts will be required. 

I also use some 6-inch ball bungee cords to hold the rod while riding. None of the rods came out without the bungee but they did move around a bit. 

Required hardware: 

  • 1 zip tie

Optional:

Printer Setting:

  • PETG
  • .4 nozzle
  • .3 layer height
  • Printed upside down, added supports for cutout and mounting plate. 

Other notes: 

I went through a lot of iterations to get the angle and cut out correct. It's pretty good but not perfect. If you have any recommendations or suggestions feel free to comment or remix. 

Tagi