1 / 4
Octopus Googly Eyes Hair Bun — zdjęcie 1
1 / 4

Octopus Googly Eyes Hair Bun

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A plastic version of the foam bun with an attachment slot.

Ocena
0 / 5
Polubienia
15
Pobrania
31
Wydruki
0
Wyświetlenia
585
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

My daughter needed a crazy hair day accessory for school and we were all out of the foam buns for dance. I scrambled together a design and thought to add a slot to put some googly eyes on.

This is Prusament Galaxy Black PLA at Draft Resolution with supports on the attachment piece. Glued the eyes on after cleaning up the supports. The attachment has a snap in click with the eyes looking up and about 4.5mm of the post should be showing still. The inner diameter of the ring torus is 25mm. When printing I was worried about the overhang on the bottom but it turns out decent for the resolution on the standard Prusaslicer PLA setting. Took a little sand paper to clean up the bottom of the ring torus just to not have any sharp edges for hair to get caught.

 

If this helped out in someway and you would like to buy me a coffee that would be appreciated:

https://www.buymeacoffee.com/bdock

Thank you

Tagi