MSA to 3M Bayonet Adapter (Advantage 200 Respirator)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter is for an MSA Advantage 200 Respirator to accept 3M 6200 cartridge filters.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 973
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This adapter is for an MSA Advantage 200 Respirator (#00817663, circa 2004 according to copyright on the unit) to accept 3M 6200 cartridge filters.
Made another adapter by Revenantautumn for a friend that didn't quite fit right. So, back to the drawing board and a completely new model was made in TinkerCAD. After a couple revisions, this is the final working model.
As pictured, an old bicycle inner-tube was cut to shape to provide a rubber seal.
Pictured accessories for this include:
3M 603 FILTER ADAPTER: https://www.thingiverse.com/thing:4215903
Dust filter cover for 3M mask: https://www.thingiverse.com/thing:3982639
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
N/A
Filament: 3DSolutech PLA Purple
Notes:
Printed with enough walls to make a solid part with no hollow spaces.
There is a small lip to act as a seal on the larger end. I found best results by printing with the smaller end facing the bed with standard supports in Cura.Category: Parts