Sartorius Ambr Crossflow Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2/15 mL and 15/50mL tube holders for Sartorius ambr Crossflow
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial
The Sartorius amber Crossflow only comes with 4 of each holder 2/15 mL and 15/50 mL tube holders, but has 8 sites for these holders to go in.
Printing more of these holders allows for all 8 sites to be configured with either 2, 15 or 50 mL tubes.
Printed in Bambu Labs White PLA with 3 walls making it fully solid, no infill. Not chemically resistant as PLA, but isn't a wetted/product contacting part and seems stable enough. Lab is temperature controlled so not worried about heat warping.
Printed stood up on end with skirt to give some stability which was trimmed off.
White = 3D Printed
Orange = Original