Cut Button Lever for Dymo LetraTag LT-100H
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for the broken lever under the "Cut" button that pushes on knife to cut the label after print.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 644
- Wydruki
- 4
- Wyświetlenia
- 2061
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Replacement for a broken lever under the cut button, that pushes the knife.
I've printed mine in PLA, with pretty rough 0.6 nozzle and 0.28 layer height on my old Ender 3.
The important part is a post-processing. The original lever is a little bit bent, so we need to replicate this bent. The lighter and sliers were enough to introduce small bent. Just adjust it to your needs after installation, so labels are printed without hitting the knife. Without post-processing knife is protruded a little and sometime printed label is jammed because if it.