FixDry filament dryer aluminium extrusion profile mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base plate for the FixDry filament dryer that can be mounted to 4040 aluminium extrusion profiles
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 643
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
My 3D printer is mounted to the wall using (slightly non-standard) 4040 aluminium extrusion profiles. I made a mountable base plate for my “FixDry” filament dryer which I bought from Amazon.
This Fusion 360 model has adjustable parameters so it's adjustable to different situations, including a different aluminium extrusion slot width. (I used Infento's non-standard 10mm slot width, but this model has 8mm by default.)
Print in PETG or something else a little bit more heat resistant than PLA. The two parts slot together when mounted.