Cubify void - make a puzzle out of (almost) any shape (supports holes!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
make a 3x3x3 from almost any shape even if it has a hole! based on the void cube. Stl's are for example.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Public Domain
make a 3x3x3 from almost any shape even if it has a hole!
based on the void cube. Stl's are for example. I call the examples the "ghost void cube" and "bumpy bead".
Print instructions
Unassociated tags: customizable puzzles, puzzle cube
Category: Puzzles Summary
make a 3x3x3 from almost any shape even if it has a hole!
based on the void cube. Stl's are for example. I call the examples the "ghost void cube" and "bumpy bead".
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
</div>Rafts:Doesn't Matter
Supports:
Yes
</div>Resolution:0.12
Infill:
10 and above
</div>Filament:
esun pla+
Notes:
3 shells, 3 bottom, and 4 to 5 top works well.
slicer tollerancing no longer needed! (I hope)added tolerancing in the 'SCAD file.
Also, keep current orientation.
A little grease helps it turn.
I used PETG at 240c for the first version. Now updated to ABS+ at the same temperatures with a lower layer height. Now using PLA+ and seems to work better.
Assembles like the void cube.
Tip: a 1/4 inch flat head screw driver may help to push parts together. just be careful not to break the parts.
Post-Printing
clean up & assembly
remove support material. and raft if used.
glue the pegs into the core.
use marks as assembly guide. (ex. small triangle to small triangle etc.)
each mark shape is a different axis.