Paw Print Sand Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun and easy-to-use sand mold in the shape of a paw print, including side handles for easy release.
- Ocena
- 5 / 5
- Polubienia
- 600
- Pobrania
- 1627
- Wydruki
- 28
- Wyświetlenia
- 4375
- Oceny
- 25
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
A fun and easy-to-use sand mold of a paw print, which includes convenient handles on each side to make it easy to release the sand when used. The model is just under 18 cm in width, allowing it to fit even on smaller print beds (such as a Prusa Mini) when rotated by 45 degrees.
This is an easy print that has been designed so that no supports are required, and the STL is oriented as it should be placed on the print bed. As designed, the walls will come out 2 mm thick, but the model should work fine when scaled up or down as well.