Magnetic foot for mounting underneath the baseplate of the Prusa enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This foot helps to reduces the wobble of the base plate of the Prusa enclosure. It's magnetic so it can mount anywhere.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I noticed that there was some wobble on the base plate of the Prusa enclosure when it was printing. I modified one of the stock feet so that it was slightly taller and so that a magnet could be installed. I then placed it under the plate, now the flex on this plate is much reduced.
This foot adds extra support and vibration isolation under the the printer.
The magnet I used has a diameter of 12.67 mm and a thickness of 1.72 mm. So don't buy larger or thicker than this and you should be ok.
9/19/2024:
Added caps V3 and V2, V2 has a slightly wider hole for the magnet so it seats easier
V3 has removed material from inside the cap so the magnet sits closer to top. It has a stronger force of attraction but the tool does not work as well for screwing it in. I recommend printing the parts with a 0.1 mm layer height for the threaded parts, greasing them, and then grip it with some pliers and gently rotate it into place.
You will also need some anti-slip pads. If you have the Prusa enclosure you should end up with 4 left over so you will be able to make at least 2.
Link to the anti-slip pads.
https://www.prusa3d.com/product/anti-slip-pad-set/