Rookery rgb

This is a Rookery bowden tool head with a added rgb neopixel inside behind the logo on the rookery. It uses a ldo kirigami pcb that has been cut down to fit inside of it it is held on by one m3x5 screw and a 3x4x5 heat insert. For the diffuser, I cut down a piece of clear plastic and scuffed it up until it was translucent.

print settings:

0.2mm layer height

3 perimeters 

30%infill

you will need to print the rookery with paint on supports where the fan holes are and for the overhang on the front

this is my config for a skr mini e3 v3:

[neopixel neo]
pin: PA8
chain_count: 1
initial_RED: 0
initial_GREEN: 0.13
initial_BLUE: 0.15
color_order: GRB
 

[gcode_macro PRINT_START]
#   Use PRINT_START for the slicer starting script - please customize for your slicer of choice
gcode:
   SET_LED LED="neo" RED=0.0471 GREEN=0 BLUE=0.5608 SYNC=0 TRANSMIT=1
   G28     ; home all axes
   SET_LED LED="neo" RED=0 GREEN=0.3843 BLUE=0.4196 SYNC=0 TRANSMIT=1
   G90                            ; absolute positioning    
   #G1 Z-20 F3000                   ; move nozzle away from bed
   SET_LED LED="neo" RED=0.7608 GREEN=0.0118 BLUE=0 SYNC=0 TRANSMIT=1

[gcode_macro PRINT_END]
gcode:
  G28 Z
  M140 S0 ; turn off heatbed
  M104 S0 ; turn off temperature
  M107 ; turn off fan
  M84 X Y E ; disable motors
  SET_LED LED="neo" RED=0 GREEN=0.13 BLUE=0.15 SYNC=0 TRANSMIT=1