Left-side Tool Holder for Original Prusa Enclosure v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool holder for the Original Prusa Enclosure's left side. Compatible with the LED strip add-on.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 149
- Wydruki
- 4
- Wyświetlenia
- 914
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a remix of my previous left-side toolholder, which was itself a remix of the right-side toolholder published by Prusa.
I wanted additional tool storage for the left side of the enclosure and printed a mirrored version of the original part. However, I discovered the mounting screws for the LED strip add-on prevented the mirrored part from installing cleanly. I've made the following changes to the original part.
- Expanded the hole on the angled section to snugly fit over the socket head of the middle screw for the LED strip.
- Added a vertical section with a second screw point.
- Removed the slot for the glue stick and added a variety of slots. There are two slots for the wrenches that come with the MK4, and six slots for Nextruder nozzles. There are then three 12mm holes for pens, screwdrivers, nozzle-cleaning needles, etc.
- Mirrored the entire part.
Because of the vertical shelf with the additional screw hole, the part can no longer be printed easily without supports. I have included a pre-sliced file that uses organic supports for the MK4.
This mounts with 2x M3x8 screws. The hole that fits over socket head on the angled section will be very snug.