1 3/8" router rabbet radius jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There were a lot of radius jigs on here, but none were 1 3/8", which is the standard rabbet bit cutter size. I don't…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
There were a lot of radius jigs on here, but none were 1 3/8", which is the standard rabbet bit cutter size. I don't mind chopping a rabbet square for a panel but I'll be damned if I'm going to bother on the back of a shop cabinet.
I also wanted it big so I could hand hold it on while using a handheld router. Uploaded version has a hole in the back to make that easier. Version in the picture is the one that made me realize I needed that.
Worked great at 100% scale
V2: made a less-shitty model that has a little relief in the corner and a chamfer on the bottom side. Previous one left routed corners just a tiny bit too pointy, so this one should work better.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30
Filament: 3D Solutech PLA
Category: Machine Tools