Original Prusa Enclosure - Honeycomb Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Why use drawers when you can hang everything you need on your Honeycomb wall
- Ocena
- 3,6 / 5
- Polubienia
- 317
- Pobrania
- 368
- Wydruki
- 8
- Wyświetlenia
- 6148
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have the honor to introduce you…
Original Prusa Enclosure - Honeycomb Edition
Why use drawers when you can hang everything you need on your Honeycomb wall.
I asked myself that same question when I saw the contest that Prusa had launched, so I got down to work.
It is designed to maximize the amount of storage per vertical square meter and is compatible with all the custom supports you can find.
Below you have the instructions to carry it out.
Compatible with any bed larger than 210x210 mm (MK3+, MK4…).
Honeycomb
Print files A-D twice, file E once and arrange them as follows.
Attaching honeycombs
Print the INSERT file four times. Being hollow, it can also be used to hang some tools.
Screws
You can use up to 24 M3x12 screws to secure the print to your Prusa Enclosure, i recommend button heads screws, it will look better. (You will also need 24 M3 nuts…).
Take a look
and enjoy your Original Prusa Enclosure - Honeycomb Edition :)