Lint Roller 35mm Diameter body, tested with Petlovers refills - May work with other brands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this model after I lost my original roller. This may work with other refill brands, but hasn't been tested.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 215
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
This was made for the Petlovers brand refills. I haven't tested this with other refill brands, but it may work, just make sure you measure the inner diameter of your refill, and that there is a small gap of space so the refill rolls properly, but doesn't fall out. The outer diameter of the roller body is 35mm, and the handle and top diameter is 40mm. If you use this for other brands and it works, please let me know!
I printed this with .2 layer height 25% infill, with minimal supports - only on the build plate. This took about 3 hours on my Bambu P1P.