1 / 4
Bike handlebar end piece (Nuroad Pro 2022)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Endpiece for the handlebar of my Nuroad Pro Fixation of bar tape end and barrier to prevent dirt entering the bar
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed it with PLA, used a 0.4 mm nozel and a layersize of 0.2 mm
I used an outer diameter 30 mm for the front face and it works fine, but could be a bit smaller