Mitutoyo Caliper Battery Cover Model 500-138
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement batter cover for Mitutoyo Calipers model 500-138.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 1432
- Wydruki
- 1
- Wyświetlenia
- 3908
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement batter cover or cap for Mitutoyo Calipers model 500-138. The identified Thingiverse model was used as a baseline for this remix.
I used eSun PLA+ as filament and it seems to be robust enough for the small clips on the cover. Use a layer height of 0.08mm and 100% infill with 3 shells/walls. I also used tree supports on build plate only, with 2 top interface layers and a top z distance of 0.1mm to support the small tabs.
Aug 5/23 V1: Added a small nub in the middle of the cover to help press the battery down to ensure contact.
NOTE: The 3mf file included is for Orca Slicer or Bambu Studio. It was set up for my Bambu X1C printer. Use at your own risk.