Schiit Remote Stand/Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Remote Stand for Schiit remotes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Fairly simple remote stand that doesn't need any supports.
I currently only have one version of the stand/holder with variations for different remote combos, I may make a shorter version or a 3 remote version in the future, so feel free to bookmark and check back for additions. Feel free to also leave a comment if there's a remote combo that I haven't added yet and I may add it here.
Print Instructions:
The print shown in the photo used the following filament/settings with an SV06+:
Black Hatchbox PETG - Nozzle: 230C Bed: 75C (max 40mm/s print speed)
30% infill
0.2mm QUALITY
Not all printers are the same though, so use the settings that will work best for your own printer.
After 7 failed prints and design iterations I finally feel confident sharing this here lol, hope you enjoy the print!
Side Note: I use blue tac on the bottom of the stand to keep it from moving when I grab or put away one of the remotes.