Lululemon Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Logo I made cause I couldn't find one.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 157
- Wydruki
- 1
- Wyświetlenia
- 494
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed one of these so I made it myself. Enjoy! You can make it a cut out so you can make coasters or have it imprinted onto other things. if you print one I'd love to see your make!
PS: I was mid print and though the infill grid looked cool, so I went ahead and stopped the print early. Now one side has the “cubic subdivision” infill pattern, and the other is flat from the steel PEI sheet. If you decide to also cancel it early your infill may look different if you use a different infill density % or a different infill pattern.
Enjoy!
I printed at .3 layer height, 45% infill at 60mm/s.