Tape Organizer Wall Mounted
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have designed this tape hanger because I have lots of rolls of different types tapes and have a limited space left…
- Ocena
- 4,75 / 5
- Polubienia
- 156
- Pobrania
- 470
- Wydruki
- 9
- Wyświetlenia
- 2413
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I have designed this tape hanger because I have lots of rolls of different types tapes and have a limited space left in my desk drawers, so it came to my mind to design a solution and this is what I came up with, I am using these for a couple of months and it is a good solution for the problem saves a lot of drawer space. I have printed some for my friends too.
These are for 1 inch / 25mm tape wide rolls & 2 inch / 50 mm wide rolls.
Print 2 walls ( 0.8 mm wall thickness).
Top and Bottom also 0.8 mm.
infill 10% to 20%.
One normal and one mirrored image. so that you can hang rolls on both side.
Print instructions
Print 2 walls ( 0.8 mm wall thickness).
Top and Bottom also 0.8 mm.
infill 10% to 20%.
No supports needed.
One normal and one mirrored image. so that you can hang rolls on both side.