1 / 1
Radiomaster RP1 RP3 ExpressLRS receiver antenna mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another part for my own frame design, however the antenna end may be useful for others designing similar mounts.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 210
- Wydruki
- 0
- Wyświetlenia
- 1265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
Basic mount for the T style 2.4GHz dipole antenna that comes with the Radiomaster RP1 & RP3 ExpressLRS receivers.
This design uses M3 heat set inserts with a hole spacing of 29.5mm & is designed to mount flush against a 3mm thick piece of CFRP.
Complete with a pair of zip ties.